Vinyl is made to resist paint, so getting it to hold a fresh coat can feel impossible. Often, the paint peels or doesn’t cover evenly, leaving you with a fence that looks worse than before. This can be frustrating, especially when your fence’s durability is as strong as before, but the color fades or looks outdated. Luckily, Natural Concepts Vinyl Fencing Services in Talbot County has expert solutions and tips that you can use to overcome vinyl paint issues.
It can be challenging to paint a vinyl fence, but it doesn’t need to be. With the right tips and assistance, you can handle common problems and get excellent results. Here are some problems and solutions:
Unlike wood, vinyl doesn’t absorb paint, which makes adhesion hard. Most paints won’t bond properly to the smooth surface and would later peel or chip.
Natural Concepts Vinyl Fencing Services recommends using an exterior latex urethane paint. This type of paint adheres better to the vinyl surface and prevents peeling or fading. Additionally, lightly sand the surface of the vinyl with fine-grit sandpaper (around 220 grit) to create texture for better adhesion.
When the temperature changes, the vinyl boards expand or contract. This constant shifting can cause paint to crack and peel if the wrong type of paint is used.
For this purpose, paints with elastic properties, like exterior latex paint, should be used. Such paints can stretch and move with the vinyl as it expands and contracts. Apply a thin, even coat of paint to allow for flexibility.
Over time, vinyl fences exposed to direct sunlight can fade due to UV damage. If you decide to paint over the vinyl, choosing the wrong color or type of paint can cause rapid fading or discoloration.
To prevent UV damage and fading, use a paint that is resistant to UV rays. Natural Concepts Vinyl Fencing Services recommends selecting a paint with built-in UV protection to preserve the vibrancy of the color for longer.
Poor surface preparation can cause even the best paint to fail. Dust, dirt, and grease can cause a blotchy or uneven finish.
Before you start painting, clean the vinyl surfaces. Natural Concepts suggests using a gentle soap and water mix to give the fence a good scrub, then rinse it all off with a hose and let it dry. This way, the paint will stick nicely and evenly without any dirt or other stuff messing up the finish.
Don’t let painting problems stop you. With these solutions from Natural Concepts Vinyl Fencing Services in Talbot County, you can solve these issues and get a beautiful look for your vinyl fence. So, follow the above-mentioned hacks and give a fresh look to your fence.
Want a professional to repair your vinyl fence? Reach out to us today. We are ready to help your vinyl fence look amazing and last long!